Coleman 5310 Use, Care & Assembly Manual page 14

Step
7
7-A
FIREBOX
7-A. Raise the Grill Lid.
Place the Right Side Table against the Firebox and on top
of the Right Side Panel.
7-B
Right
Side
Table
7-B. Align two Keyhole Slots in the Right Side Table over two pins on the side of the Firebox
(see Fig. 7-C).
Assemble two screws (TN) through the back flange of the Right Side Table into the back
flange of the Right Side Panel (see Fig. 7-C).
Assemble two screws (TN) through the front flange of the Right Side Table into the front
flange of the Right Side Panel (not illustrated).
14
NOTE: The Grill Lid
should be opened for
Steps 7 and 8.
Assemble Right Side
Table to the Grill.
Right
Side
Table
Right Side
Panel
Hardware shown actual size
(TN)
M6 x 15mm Screw M6 Flat Washer
(5) Qty.
Align
Slot with
Pin
(UO)
(DY)
M6 Locking Hex Nut
(1) Qty.
(1) Qty.
7-C
TN