Coleman 5310 Use, Care & Assembly Manual page 9

Step
2
2-A. Assemble four Caster Brackets to the
Grill Base using three screws (TN) in
each bracket (see Fig. 2-B).
NOTE: The four Caster Brackets are
identical. Rotate each Caster Bracket so
three holes in each bracket align with
three holes on the Grill Base.
Tighten all fasteners.
TN (x3)
Per Corner
Assemble four Caster Brackets to the Grill Base.
Assemble two Locking Casters to the front of the
Grill Base.
Assemble two Non-Locking Casters to the rear of the
Grill Base.
2-A
2-B
Caster
Bracket
Front
2-C
Front
Locking
Caster
2-C. Fasten Casters tight against the Caster Brackets.
Hardware shown actual size
(TN)
M6 x 15mm Screw
(12) Qty.
Back
Caster
Bracket (x4)
Locking
Back
Locking
Casters
Caster
Non-
9