Coleman 5310 Use, Care & Assembly Manual page 22

Step
13
13-A
13-A. Slip the Burner Tube through the Left Side Table.
13-B
Burner
Valve
13-B. Align Burner Tube with Burner Valve.
NOTE: Make sure Burner Valve is inserted into Burner
Tube.
22
Assemble the Side Burner
to the Left Side Table.
Assemble the Electrode to
the Side Burner.
NOTE: On some models,
the Electrode is pre-installed
by the factory.
Burner
Tube
Hardware shown actual size
(ZT)
Hair Pin
(1) Qty.
(Attached to Burner)
13-C
ZT
YS
WQ
13-C. Lock the Side Burner in place with one hairpin (ZT).
Install electrode as shown with one screw (WQ) and one
hex nut (YS).
NOTE: On some models, the Electrode is pre-installed
by the factory.
13-D
13-D. View showing Side Burner properly installed.
(WQ)
M4 X 10mm Screw M4 Hex Nut
(1) Qty.
Electrode
Caution: Assemble the
wires BELOW the burner
tubes!
(YS)
(1) Qty.