Ocean Sonics Buoy Quick Start; Assemble Buoy Configuration; Connect To Recorder Buoy - Ocean Sonics Recorder Buoy User Manual

Ocean Sonics Buoy Quick Start

OSL
Tip:

Assemble Buoy Configuration

1. Ensure the buoy has batteries properly loaded and is in the OFF position
(OFF Position: 0).
2. Attach cables, smart cables and hydrophones in configuration for deployment
(See Appendix
3. Turn ON Ocean Sonics Recorder Buoy (ON Position: 1).

Connect to Recorder Buoy

4. Attach the serial cable to the top of the buoy in the designated MCBH8 connector.
5. Connect the cable (USB end) into a computer USB port.
a. If the USB device is not recognized when the test cable is plugged in, run the
setup executable installation package for the driver that can be found on your
data stick (/icListen/Serial to USB Test Cable Driver).
For a quick setup install Ocean Sonics' Software Programs
Gordon,
Marco & Lucy
A).
Recorder Buoy User Guide
on your PC prior to setting up your buoy.
April 2020 P.3