4. Line up new batteries to insert in same fashion batteries were removed.
5. Pull cables through the middle of the batteries.
6. Attach cables to connectors as shown above.
Note: Batteries can plug into either of the top hat connectors.
Maintenance
•
The Recorder Buoy should be thoroughly rinsed with fresh water after each
deployment to remove saltwater and debris.
•
The Recorder Buoy should only be opened when it is safe to do so in a clean
environment without chance of water entering the inside.
•
The Recorder Buoy and hydrophones should be shut down when not in use to
conserve battery.
Recorder Buoy User Guide
April 2020
P.9