Charging The Battery; Charger Idle Display; Starting A Charge Cycle; Delayed Start - Hawker LIFESPEED MOD3 Owner's Manual

LIFESPEED MOD3
Once the charger is set up by a qualified service person, charging begins when a battery of the
proper type, capacity and voltage is connected to the charger. While the charger is in idle mode
(No battery connected), the display will show the following information:
1
2
4
S11

Starting a Charge Cycle

The charger will start automatically when a battery is connected, or by pushing the Stop/Start
button if the battery is already connected.

Delayed Start

If the charger was programmed for delayed start, charging will begin following that delay. When
the battery is plugged in to the charger, the display shows the time remaining before the
programmed charging starts.
Owner's Manual

CHARGING THE BATTERY

Charger Idle Display

Ref Description
1 Charger Type
2 Firmware Version
3 System Time and Date
4 Connect Battery
22
AM-HLSM3-OM
Rev AB October 2019
3