Advertisement
Quick Links
NM-VIDBALL
B/W
Color
This general purpose security camera mounts to a typical rectangular junction box and is viewed with
a security monitor. To view the camera on a single standard television, use the TV's composite RCA
Video Input jack.
Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base Plate, Video Connector, Power Connector).
2. 12V DC 300mA Power Transformer, Center Conductor Positive.
3. Mounting Screws.
Elbow Bracket
Adjusts camera angle at Base
Plate , screw, and Housing.
Locking Ring
Secures elbow bracket to
Base Plate at desired position.
Base Plate
Supports power regulator and
Video/Power Connectors. Mount
to rectangular junction box.
Video Connector
Female BNC connector.
FEATURES
Excellent image quality
Tough billet aluminum housing
Internally routed cables
Mounts to standard electrical fixtures
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
Security Video Camera
Day/Night
Color
SPECIFICATIONS
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Output Connector:
Power Requirement:
Power Connector:
Housing Size:
Base Size:
Mounting Holes:
Weight:
Indoor Ball Camera
Camera Assembly
Available in UV Paintable White
B/W camera
Color camera
Day/Night Color Housing
NM-VIDBALL-BW
NM-VIDBALL-HW
NM-VIDBALL-CW
Remove to adjust focus.
Comes prefocused from
factory but can be adjusted
by rotating in either direction.
Power Connector
12V DC 300mA, center positive.
B/W
Color
3.6mm
3.7mm
1/3" CCD
1/4" CCD
350 lines
470 lines
72˚ Horizontal
54˚ Horizontal
0.7 Lux F2.0
0.5 Lux F1.2
Yes
No
Female BNC, 75 Ohm
12V DC, 300mA
5.5mm OD, 2.1mm ID, center positive
2.33" dia.
4.5" long x 2.75" wide
3.25" centers
1 lb.
(subject to change without notice)
White
Housing Cap
Camera Lens
Day/Night Color
3.6mm
1/3" CCD
470 lines
72˚ Horizontal
0.3 Lux F1.2
Yes
MAN-VIDBALL
REV0703A
Advertisement
Related Manuals for NetMedia NM-VIDBALL
Summary of Contents for NetMedia NM-VIDBALL
-
Page 1: Product Includes
NM-VIDBALL Color This general purpose security camera mounts to a typical rectangular junction box and is viewed with a security monitor. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack. Product Includes: 1. -
Page 2: Installation Procedures
NM-VIDBALL DO NOT CUT OR SPLICE THE CAMERA’S CABLES. MODIFYING THE UNIT IN ANY WAY WILL VOID THE WARRANTY. Installation Procedures: 1. Connect a video cable from the viewing device (monitor, Quad, DVR, modulator, etc.) to the camera’s Video Connector. Adapters, such as BNC to F or RCA, may be used where appropriate. -
Page 3: One Year Limited Warranty
Tucson, AZ 85737 (520-544-4567) declare under our sole responsibility that the following products, Type of Equipment: Security Camera Model: NM-VIDBALL-BW Model: NM-VIDBALL-CW Model: NM-VIDBALL-HW to which this declaration relates are in conformity with the Title 47 of the US Code of Federal Regulations, Part 15 covering Class B digital devices. - Page 4 Q- Why do the light areas of the picture look washed out? A- The camera’s automatic iris must decide how much to open for shadow areas or close for light areas. When a picture has both light and shadow, the camera adjusts the iris based on the percentage of each area in the image.