Advertisement
INSTALLATION
1. Using a Phillips head screwdriver (not supplied), remove the two plate fixing screws (1)
and nuts (2) from the fixing plate at the bottom of the standard frame. Remove the
fixing plate.
2. Align the holes on the fixing plate onto those on the bottom of the extension bracket.
Using a Phillips head screwdriver, secure the plate fixing screws and nuts to attach
the fixing plate to the extension bracket.
3. Use a Phillips head screwdriver to remove the four bottom plate fixing screws (3) on
the standard frame. This will detach the bottom of the standard mounting bracket.
1
1
3
2
2
Advertisement
