Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Kogan Manuals
  4. TV Mount
  5. KAWLMFM90MA
  6. User manual

Kogan KAWLMFM90MA User Manual

Universal extendable ceiling projector mount bracket
Hide thumbs Also See for KAWLMFM90MA:

Advertisement

Quick Links

Download this manual
KOGAN UNIVERSAL
EXTENDABLE CEILING
PROJECTOR MOUNT BRACKET
KAWLMFM90MA

Advertisement

loading

Related Manuals for Kogan KAWLMFM90MA

Summary of Contents for Kogan KAWLMFM90MA

  • Page 1 KOGAN UNIVERSAL EXTENDABLE CEILING PROJECTOR MOUNT BRACKET KAWLMFM90MA...

  • Page 3: Safety And Warnings

    SAFETY & WARNINGS Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance. CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
  • Page 4 COMPONENTS A (x1) D (x1) B (x1) C (x1) E (x1) M-A (x6) M-B (x4) M-C (x4) M-D (x4) M-E (x4) M-F (x4) M-G (x4) M5 x 10 M6 x 10 M5 x 8 M4 x 8 M3 x 8 M-H (x10) M-I (x2) M-J (x4)

  • Page 5: Preparing The Mount

    PREPARING THE MOUNT Step 1 Using the 5mm Allen key (M-L), loosen the arm (B) screw to separate the upper and lower pieces. Step 2 Using a Phillips head screwdriver (not supplied) loosen the three screws on the lower arm and remove the backing plate.
  • Page 6 Step 3 Once all cables are in position, replace the backing plate and tighten the three screws. Then return the lower arm back within the upper arm.
  • Page 7 Step 4 With the cables in place, attach the ceiling bracket (A) and projector mount (C) to the arm assembly with their respective washer and screw pairings (M-B, M-J and M-A, M-H as shown below).
  • Page 8 INSTALLING MOUNT Using a pencil, mark the desired position for the mount on your ceiling, using the mount to serve as a stencil for the hole positions. If mounting on wood joist ceiling, use a stud finder first to check positions of joists and ensure the position is free from electrical wiring. Using a drill, create the pilot holes.
  • Page 9 SECURING PROJECTOR TO MOUNT Align the bracket (D) with your projector’s VESA holes and secure using supplied screws (M- C, M-D, or M-E) and washers (M-F, M-G, or M-H) depending on required length. Insert M-M extension brackets if required for your projector. Use a Phillips head screwdriver (not supplied) to tighten screws.
  • Page 10 Using the 5mm Allen key (M-L), set the arm assembly’s length. Hook the projector (with bracket installed) onto the mount (C). Two people should lift the projector to prevent damage. Once in place, secure the bracket into place using the M-A screw and washers (M- H, M-I).
  • Page 11 Tighten the mount at the desired angle using the M-K Allen key to lock mount into position.
  • Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...