Download Print this page
Kogan KAWLM65TLTA Quick Start Manual
Kogan KAWLM65TLTA Quick Start Manual

Kogan KAWLM65TLTA Quick Start Manual

Tilt adjustable wall mount for 32” ~ 65” tvs

Advertisement

Quick Links

This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children.
Make sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of the installation,
please contact a professional installer for assistance.
The wall or mounting surface must be capable of supporting the
combined weight of the mount and the display, otherwise the structure
must be reinforced.
Safety gear and proper tools must be used. A minimum of two people are
required for this installation. Failure to use safety gear may result in
property damage, injury or death.
Please ensure children do not play with the mount or the mounted
television at any time.
Please check the mount every two months to ensure that bolts and screws
are tight, and that the wall behind the mount appears to be in good
condition.
This product was designed to be installed on solid concrete walls.
Before installing, make sure the wall will support the combined load of the
equipment and hardware.
Never exceed the maximum load capacity of 45kg, or it may result in product
failure or personal injury.
: this product is intended for indoor use only. Use of this product outdoors
could lead to product failure or personal injury.

Advertisement

loading

Summary of Contents for Kogan KAWLM65TLTA

  • Page 1 This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children. Make sure these instructions are read and completely understood before • attempting installation. If you are unsure of any part of the installation, please contact a professional installer for assistance.
  • Page 2 M4 x 10mm M5 x 12mm M5 x 16mm M6 x 12mm A (4 pcs) B (4 pcs) C (4 pcs) D (4 pcs) M6 x 16mm M6 x 20mm M5 Washer E (4 pcs) F (4 pcs) G (8 pcs) M8 x 60mm M10 x 50mm M8 Washer...
  • Page 3 If using A, B, C please use G. • If using D, E, F please don't use G. • : If the TV hole pattern is larger than the TV plate, you are required to use the extension plates to install.
  • Page 4 Tighten the screw into the holes of the bottom bracket. • Tighten or loosen the screw nuts on the head of the wall plate to adjust • the tilting function. Tighten or loosen the M6 screw nuts on the head of the wall plate to keep •...