Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KATVLDT65LA
Summary of Contents for Kogan KATVLDT65LA
- Page 1 RGB LIGHTING GAMING TABLETOP TV (SUITABLE FOR 37-65" TVS) KATVLDT65LA...
-
Page 2: Safety And Warnings
SAFETY & WARNINGS Read the entire user guide before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance. CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury. - Page 3 COMPONENTS A (x1) B (x1) C (x1) D (x1) E (x2) F (x1) G (x1) H (x2) I (x1) J M6x8 Screw (x10) K M6x12 Screw (x2) L x M6x40 Screw (x4) M Allen Key 4mm (x1) N Allen Key 5mm (x1) P-A (x1) P-B (x2) P-C Allen Key 2mm (x1)
- Page 4 P-E Wall Anchors (x4) M-A M6x14 Screw (x4) M-B M8x16 Screw (x4) M-C M6x30 Screw (x4) M-D M8x35 Screw (x4) M-E D8 Washer (x4) M-F Spacer (x4) M-G Spacer (x4) Tools Required Stud Finder Pen/Pencil Drill & Drill Bit Tape Phillips Head Measure Screwdriver...
- Page 5 ASSEMBLY Step 1: REAR Step 2:...
- Page 6 Step 3: Note: After assembling the column (A) to the base assembly, press the cables into the groove as shown and then attach the decorative cover (I).
- Page 7 Step 4: For Universal TVs For Samsung TVs...
- Page 8 Step 5: Align the bracket assembly with your TV’s VESA holes and secure using supplied screws (“M-” set), Washer (M-E) and spacers (M-F, M-G) depending on required length.
- Page 9 Step 6: Connect the cable of the TV stand to the TVs USB port.
- Page 10 Step 7a: Drywall / plaster • Using a pencil, mark the desired position for the safety brackets on your wall, using the brackets (P-B) as a template for the hole positions. • Use a stud finder first to check positions of wall studs and ensure the position is free from electrical wiring.
- Page 11 • Using a drill and a Ø3.5mm or 1/8” drill bit, create four 40mm deep pilot holes. Ø3.5mm 40mm (Ø1/8") (1.6") • Attach the brackets (P-B) to the wall using the x4 ST screws (P-D). Note: Do not use wall anchors.
- Page 12 Step 7b: Masonry / concrete • Using a pencil, mark the desired position for the safety brackets on your wall, using the brackets (P-B) as a template for the hole positions.
- Page 13 • Using a drill and a Ø7mm or 9/32” drill bit, create four 40mm deep pilot holes. 40mm Ø7mm (1.6") (Ø9/32") • Insert the x4 wall anchors (P-E) into the drilled holes. Attach the brackets (P-B) to the wall using the x4 ST screws (P-D).
- Page 14 Step 8: Attach the safety wire as shown to prevent any accidental tipping or falling.
- Page 15 Step 9: Notes: • If using the TVs USB port to power the TV stand, the stand's lighting will power on/off with the TV when it is powered on/off. • Long touch the button to manually control the stand lighting on/off. •...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...