Advertisement
4. Align the holes on the side of the extension bracket with those on the side of the
standard frame. Use a Phillips head screwdriver to secure the four fixing screws (3)
through the holes, connecting the extension bracket to the standard frame.
Note:
If the screws are broken, use the included 10mm ST5 screws.
5. Using two 10mm ST4 screws (4), connect the top plate of the extension bracket to
the bottom plate of the standard frame.
6. Once attached, follow the installation method found in the user guide for the Kogan
2.6kW Vertical Window Air Conditioner.
Note that as opposed to attaching the bottom of the standard frame to the window,
the bottom of the extension bracket is attached instead.
3
Standard frame
Extension bracket
4
Advertisement
