Table of Contents
Advertisement
NAVMAN
Setting options
Press and hold
Press
repeatedly to step through the setting options.
Press both buttons together (
a setting option.
While editing, press
or increase/decrease values. Press and hold the appropriate button to
increase/decrease values quickly.
Set (12hr)
lets you set 12hr or 24hr time format
Set (31-12)
lets you set dd-mm or mm-dd date format
Calc up
When 'calc up' is «ON» the X300 calculates data for all
movement (uphill and downhill). When 'calc up' is «OFF» the
X300 calculates information for downhill movement only.
Beep
When beep is «ON» a beep will sound when the buttons are
pushed.
Set units (km/h)
lets you set speed units to «km/h» or «mph»
Distance and altitude are displayed in units corresponding to the speed
units, i.e. if you choose «km/h» for speed units, then distance is displayed
in «km» and altitude in «m».
Set offset
lets you adjust the X300 to display local time
The date is displayed to ensure that time adjustments are made in the
correct direction, i.e. both correct time and correct date should be
displayed.
GPS signals must be obtained to set local time.
Press and hold
to enter setup
) to start or stop editing
or
repeatedly to step through selectable states,
to leave setup
X300
X300 — Settings
Advertisement
Table of Contents
