Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
MODEL: PLTEAB4872BUDECONF
ASSEMBLY INSTRUCTIONS
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
ATTENTION
!
!
Ensure all bolts and screws are tightened, check bolts and screws every 6 months.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
Last Updated: 02/2021
®
1 of 4
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for OfficeSource PLTEAB4872BUDECONF
Summary of Contents for OfficeSource PLTEAB4872BUDECONF
- Page 1 ASSEMBLY INSTRUCTIONS ® MODEL: PLTEAB4872BUDECONF ASSEMBLY INSTRUCTIONS Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions. 1 of 4 ATTENTION Ensure all bolts and screws are tightened, check bolts and screws every 6 months.
- Page 2 ASSEMBLY INSTRUCTIONS ® MODEL: PLTEAB4872BUDECONF Part Lists Place the Table Leg Frame on the Drawing Name bottom side of the table top Center Trunk Column Side Support Screw M6x10 Handset Screw 5x20 Screw 3x20 Power Cable Allen Key 5 Step.
- Page 3 ASSEMBLY INSTRUCTIONS ® MODEL: PLTEAB4872BUDECONF Detail B Detail A Tighten up the screws Step. Step. Put Handset's connecting line through the hole below the Left Trunk Step. 3 of 4 Last Updated: 02/2021...
- Page 4 ASSEMBLY INSTRUCTIONS ® MODEL: PLTEAB4872BUDECONF ※ Important ※ Reset the table before use : 1. Press and hold & for more than 3 seconds ∧ ∨ 2. Continue pressing both buttons until both columns are in the lowest position 3. The table will rebound 2-5mm 4.
Need help?
Do you have a question about the PLTEAB4872BUDECONF and is the answer not in the manual?
Questions and answers