Led Indicators - Cantel Medical MEDIVATORS DSD EDGE Service Manual

LED Indicators

The LED indicators alert the operator to system functions and errors. There are four types of indicators used on the
reprocessor control panel.
• Status Indicators
The status indicators blink if an error occurs, or if the STOP button is pressed. The upper indicator identifies
station A. The lower indicator identifies station B.
• Station Indicator
The station indicator identifies that the disinfection station is in use. The LED illuminates when the station is in
use.
• Cycle Phase Indicators
The phase indicators identify which cycle phase the system is performing. The LED illuminates (or blinks) to
indicate the present cycle phase.
• Warning Indicators
The warning indicators alert the operator to system errors, or other conditions requiring immediate attention. The
upper indicator identifies station A. The lower indicator identifies station B.
Station
Indicator
Status
Indicators
Station
Indicators
Figure 2 : Indicators
Phase
Indicators
Warning
Indicators
Air
Alcohol
Phase
Indicators
19