Via Wi-Fi - FlightScope MEVO+ User Manual

Connect manually
If you are unable to connect using the QR code, then you can connect
manually in your device settings. Follow these easy steps:
1
Make sure your phone's Wi-Fi is turned on.
1 1
Press the on/off button on the unit, the system and battery lights will come on.
2
2
2
The connection light will be solid blue while the unit is ready for connection.
Select Wi-Fi settings on your phone and select the unit with your serial number.
3
3 3
The Wi-Fi password is your serial number, for example: M2-123456.
4
Launch the app on your phone and proceed.
4 4
The connection light on the the unit will turn to solid green when connection has
5
5 5
been established.

(via Wi-Fi)

13