Page 3
10 sec. - 15 min. 2 - 1000 Lux – 5 – – 4 –...
Page 4
Surface wiring Underneath the mounting plate you will find two 3� LS 150 LED lugs for surface wiring. Break off one of the two lugs. Use the sealing plug to close off the cable Proper use opening in the mounting plate. Pierce the sealing –...
Page 5
(Fig� 7�1). approx. 10 seconds to a maximum of 15 minutes. spection. Steinel guarantees that it is in perfect The shrouds can be separated along the pre- Any movement detected before this time elapses condition and proper working order.
Page 6
3� LS 150 LED n Cars on the road are being n Change detection zone sé(e) à remplacer la source lumineuse de ce luminaire.
Need help?
Do you have a question about the LS 150 LED and is the answer not in the manual?
Questions and answers