Philips sonicare DiamondClean 9000 Series User Manual page 14

14
English
Brushing instructions
45°
1 Wet the bristles and apply a small amount of
toothpaste.
2 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees). Pressing firmly
to make the bristles reach the gumline or
slightly beneath the gumline.
Note: Keep the center of the brush in contact
with the teeth at all times.
3 Press the power on/off button to switch on
the Philips Sonicare.
4 Gently keep the bristles placed on the teeth
and in the gumline. Brush your teeth with
small back and forth motion so the bristles
reach between the teeth. Continue this
motion throughout your brushing cycle.
Note: The bristles should slightly flare. It is not
recommended to scrub as you would with a
manual toothbrush.
Note: If you apply too much pressure, you will
be alerted by a change in vibration of the
handle and the brush head replacement
reminder flashing amber.