Philips sonicare DiamondClean 9000 Series User Manual page 13

Getting started
Using your Philips Sonicare toothbrush
- Applied brushing pressure
- Brush head replacement reminder (based on
actual use)
The Sonicare app collects the data provided by
the smart sensors and tracks your brushing habits
over time.
1 Align the brush head so the bristles point in
the same direction as the front of the handle.
2 Firmly press the brush head down onto the
metal shaft until it will not go any further.
Note: It is normal to see a slight gap between
the brush head and the handle.
If you are using your Sonicare toothbrush for the
first time, it is normal to feel more vibration than
when using a non-electric toothbrush. It is
common for first-time users to apply too much
pressure. Only apply gentle pressure and let the
toothbrush do the brushing for you. Please follow
the brushing instructions below for the best
experience.
To help you transition to your new Sonicare
power toothbrush, use a lower setting for the
first 1-2 weeks then transition to a higher setting.
13
English