Checking And Cleaning The Engine And Electrical Wiring; Washing The Whole Machine; Checking The Seat Belt And Rops; Checking The Engine Hood Lock - Kubota U 10-5 Operator's Manual

MAINTENANCE
7. Checking and cleaning the engine
and electrical wiring
WARNING
To avoid personal injury or death:
• Always stop the engine before cleaning the
wiring, cables and engine.
1. Check whether
gathered on the battery, cables, wiring, muffler, or
engine, and thoroughly
substances.
2. Check the electrical circuitry for disconnections,
shorts, or loose terminals.

8. Washing the whole machine

IMPORTANT :
• Do not wash the machine with the engine
running. Water could enter the air filter and
damage the engine. Make sure that the air filter
is kept dry.
• Remove the mud before washing the machine.
1. Stop the engine.
2. Wash the machine.

9. Checking the seat belt and ROPS

1. Check condition of seat belt and ROPS before
operating the machine.
2. Replace if damaged.

10. Checking the engine hood lock

IMPORTANT :
• When the engine hood is closed, make sure that
it is securely locked.
(See Opening the engine hood on page 56.)
1. Check that the engine hood only opens when the
lever is pulled up.
60
flammable substances
remove any
have
such
(1) Lever
DAILY CHECKS
(A) "Open"
U10-5