Kubota U 10-5 Operator's Manual page 22

SAFE OPERATION
1. Care of safety labels
• Keep safety labels clean and free from obstructing material.
• Clean safety labels with soap and water, and dry with a soft cloth.
• Replace damaged or missing safety labels with new labels from your Kubota dealer.
• If a component with safety label(s) affixed is replaced with new part, make sure new label(s) is (are) attached in
the same location(s) as the replaced component.
• Mount new safety labels by applying on a clean dry surface and pressing any bubbles to outside edge.
18
U10-5