Configuring The Router Function On The An-X; Viewing The Current Router Configuration - ProSoft Technology AN-X4-AB-DHRIO User Manual

34 AN-X4-AB-DHRIO (DH+)
Page

Configuring the Router Function on the AN-X

Use Automation Network/Configure DH+ Router in the web interface to send a configuration file
to the AN-X.
Browse to select the file, then click the Send File to AN-X button to send the file to the AN-X.
The AN-X displays result of transmitting the file.
AN-X displays the result of the configuration. The upper pane shows the configuration file it
downloaded. The lower pane shows the router configuration log. Always check the log after you
configure the router to ensure there were no errors.
The Router Configuration log is also available by selecting Automation Network/DH+ Router
View.

Viewing the Current Router Configuration

To view the current router configuration, select Automation Network/DH+ Router View in the
web interface.
To retrieve the current router configuation from the AN-X, select Automation Network/Configure
DH+ Router in the web interface, then right click on the (right-click - save link as) link and save
the file.
Nov 2022