Page 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0620 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. . READ AND SAVE THESE INSTRUCTIONS. Hardware Package (included): Important to Know: Features:...
Installation Steps CAUTION: Be sure to caulk completely where the back plate meets the wall surface to prevent water from seeping into the outlet box. Adjusting the Sensor Head: Note: Range set too high may increase false triggering. Fig. 1 220531...
Page 3
Fig. 2 Fig. 3 Fig. 4 Adjusting the Light Head: Notes: Where you install your fixture is important: 220531...
Page 4
USER GUIDE Se ng for single light through mobile device (Take iOS for example as below. Android will be slightly di erent). Note: When power is first applied, the light will turn on to 100% brightness. The sensor will take 45 seconds to warm up. Before you start 220531...
Page 5
USER GUIDE (continued) 1. Turn power on for the light. 2. Press the RESET button on the light 3 times within 5 seconds. 3. Red indicator light will slowly flash. 4. Check the Location setting on your device is Note: turned on.
Page 6
USER GUIDE (continued) 1. Turn power on for the light. 2. Press the RESET button on the light 3 times within 5 seconds. 3. Red indicator light will slowly flash. 4. Check the Location setting on your device is turned on. Note: Only works with 2.4GHz WiFi networks.
Troubleshooting The following parts are available for re-order if damaged or missing. Call our toll free at 1-800-887-6326. 5-YEAR LIMITED WARRANTY: 220531...