Page 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0238 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. Read and save these instructions.
Page 2
Installation Steps Turn off the power at fuse or circuit box. 1. Thread two headless screws through the mounting plate, and then secure them with four lock nuts (two on each side of the mounting plate). Adjust the length of the headless screws if necessary. Note: Make sure that the headless screws are lined up horizontally to make the fixture level.
Page 3
The following parts are available for re-order if damaged or missing. Spare Parts List: Assembly Kit 5536MM (1 SET) Green Grounding Headless Screw(D) Mounting Screw (B) Mounting Plate (A) Screw (C) Rubber Pad (H) Wire Nut (F) Ball Nut (G) Glass Panel 9806RG (4PCS) A: 9"...