Advertisement
The VideoMate 2250 is fully equipped for dissolve
operation and is fully equipped for dissolve operation and
is fully compatible with external dissolve. Control sys-
tems already in existence.
In the past, most projectors were controlled by simple
contact closure. Today's advanced boardroom control
systems, however, are using RS232 for control of the AV
components and room functions.
With the VideoMate 2250, you can electronically control
the projector, lens and camera functions of your slide-to-
video transfer unit by RS232 control from your PC
computer or boardroom control system via the P-Bus-In
(9-pin sub D socket). For connection, use a monitor
cable (1:1, shielded).
A software control package for a PC computer is avail-
able. With the help of the communications language
P-COM Protocol, commands are given directly to the
projector's microprocessor. Commands are transferred
in binary code. For more information, call Navitar directly
or e-mail us at info@navitar.com.
The motorized zoom function allows you to zoom in on a
slide for increased magnification or zoom out to view a
vertical slide.
You can pre-program the exact slide sequence you
require or randomly jump to any slide tray position at any
time. For example, you can randomly program your slide
sequence to go from slide #1 to slide #10 and have
different zoom positions (magnifications) and brightness
presets for each slide. Just punch the number of the
desired slide into your control system and press enter.
It's that simple.
18
Advertisement
