Download Print this page

Navitar VideoMate 2250 User Manual page 12

Video slide projector

Advertisement

heads to move the internal unit in a sideways motion.
Retighten the four screws.
The two screws marked "B" provide both vertical and
rotational image movements. Turning one screw will tip,
or rotate, the image, while turning both screws will move
the image in a vertical direction.
Caution
Do not turn screws marked "X" or the reference position
will be lost. It should never be necessary to move any
screw far from its "as received" condition. Excessive un-
threading of a screw could result in loss of engagement
and major disassembly.
Slides are changed by using the arrow buttons on top of
the projector. The
key moves the tray forward and
the
key moves it backward.
To transport the tray quickly in either direction, press and
hold down the correct slide change button until the
position desired is reached. The tray will, however,
automatically stop at #0 and will remain in this position.
If you want to repeat the search run; press the slide
change buttons again.
The VideoMate 2250 can sense when there is a slide in
the gate. Only then will the shutter open and the lamp
achieve its optimum brightness. It is no longer neces-
sary to use dark slides when the slide gate is empty.
12

Advertisement

loading

This manual is also suitable for:

Videomate 2250p