Golden JS-1400 Installation Manual page 9

Step 2:
TRACK MOUNT PULLEY ASSEMBLY INSTALLATION:
1. FLIP TRACK OVER (CHANNEL SIDE FACING UP) AND LOCATE THE
FOUR HOLES AT THE TOP OF THE TRACK.
2. USING THE TWO PROVIDED PULLEY MOUNT PLATES, (ONE WITH
WELDED SPACERS, ONE WITHOUT) SLIDE THE SPACER PLATE
INSIDE OF THE CHANNEL (SPACERS FACING THE INSIDE FLANGE)
AND PLACE THE OTHER PLATE ON THE OUTSIDE OF THE FLANGE,
SANDWICHING THE FLANGE BETWEEN THE PLATES. ALIGN THE
FOUR HOLES IN BOTH PLATES WITH THE FOUR HOLES IN THE
FLANGE. SLIP ONE FLAT WASHER OVER EACH OF THE FOUR
PROVIDED 3/8" X 1-1/2" BOLTS AND INSERT THROUGH TRACK
AND BOTH PULLEY PLATES. SECURELY FASTEN WITH THE
ACCOMPANYING HARDWARE.