Advertisement
Step 7:
CRADLE ARM INSTALLATION:
1. TAKE ONE OF THE TWO PROVIDED CRADLE ARMS AND SLIDE IT
OVER EITHER SIDE OF THE SUPPORT TUBES PROTRUDING
OUTWARD FROM THE ROLLER CARRIAGE ASSEMBLY.
(ORIENTATION IS A NON-FACTOR AS CRADLE ARMS ARE
AMBIDEXTROUS). ALIGN THE HOLES IN THE CRADLE ARM TUBE
WITH THE HOLES IN THE SUPPORT TUBES. SLIP ONE FLAT WASHER
OVER TWO OF THE FOUR SUPPLIED 3/8" X 4" BOLTS AND INSERT
THROUGH THE HOLES IN THE CRADLE ARM TUBE AND SUPPORT
TUBES. SECURELY FASTEN THE ACCOMPANYING HARDWARE.
REPEAT THIS PROCESS FOR THE OTHER CRADLE ARM.
Advertisement
