Advertisement
Step 5-1:
TRACK MOUNTING & INSTALLATION:
3. USING ONE OF THE TWO SUPPLIED Z-TABS, ALIGN THE HOLES IN
THE BRACKET WITH THE HOLES IN THE Z-TAB CAPTURING THE
FLANGE OF THE TRACK. SLIP ONE FLAT WASHER OVER EACH OF
THE THREE SUPPLIED 3/8" X 1-1/2" BOLTS, INSERT INTO THE
HOLES AND LOOSELY FASTEN ACCOMPANYING HARDWARE TO
ALLOW FOR ADJUSTMENT. REPEAT THIS PROCESS FOR THE OTHER
SIDE.
4. NEXT, USE A LEVEL TO ENSURE THAT THE TRACK IS SQUARE AND
PLUMB TO THE SURFACE THEN TIGHTEN THE HARDWARE
COMPLETELY.
Advertisement
