Golden JS-1400 Installation Manual page 19

Step 5:
TRACK MOUNTING & INSTALLATION:
1. USING THE DOCK/SEAWALL MOUNTING BRACKET, MOUNT THE
BRACKET TO THE SURFACE (HARDWARE NOT SUPPLIED) SO THE
FACE OF THE VERTICAL PLATE (PLATE WITH SIX HOLES) IS FLUSH
TO THE VERTICAL FACE OF THE MOUNTING SURFACE AND THE
TRIANGULAR GUSSETS ARE ON TOP OF THE MOUNTING SURFACE.
2. SLIDE ROLLER CARRIAGE DOWN TO THE BOTTOM OF THE TRACK
TO REMOVE ANY SLACK IN THE CABLE. WITH THE ASSEMBLY
INTACT, MOVE THE ASSEMBLY TO THE DESIRED MOUNTING
LOCATION. (BE SURE TO REMOVE ANY UNDERWATER
OBSTRUCTIONS WHICH MAY INTERFERE WITH TRACK LEVELING
AND SEATING). STAND THE ASSEMBLY VERTICALLY UPRIGHT AND
POSITION THE REAR FLANGE OF THE TRACK AGAINST THE
VERTICAL FACE OF THE MOUNTING BRACKET.