Compliance Statements For Acoustic Noise For Ex Series Switches; Statements Of Volatility For Juniper Network Devices - Juniper EX4600 Hardware Manual

Compliance Statements for Acoustic Noise for EX Series Switches

Statements of Volatility for Juniper Network Devices

Copyright © 2019, Juniper Networks, Inc.
GR-63-CORE: NEBS, Physical Protection
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
The battery return connection is to be treated as an Isolated DC return (DC-I), as
defined in GR-1089-CORE.
You must provision a readily accessible device outside of the equipment to disconnect
power. The device must also be rated based on local electrical code practice.
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
Maschinenlä rminformations-Verordnung - 3. GPSGV, der hö chste Schalldruckpegel
beträ gt 70 dB(A) oder weniger gemä ss EN ISO 7779
Translation:
The emitted sound pressure is below 70 dB(A) per EN ISO 7779.
A statement of volatility—sometimes known as letter of volatility—identifies the volatile
and non-volatile storage components in Juniper Networks devices, and describes how
to remove non-volatile storage components from the device.
NOTE: Statements of volatility are not available for all Juniper Networks
devices.
CTP Series:
CTP2000
EX Series:
EX2200 and EX2200-C
EX2300-24P, EX2300-24T, and EX2300-24T-DC
EX2300-48P and EX2300-48T
EX2300-C
EX3300
EX3400-24P, EX3400-24T, EX3400-24T-DC
Chapter 7: Safety and Compliance Information
155