Table of Contents
Advertisement
14. Assembly of B925 - B925B divert
1. Heat up seal rings (14 and 62)* in water to approx
85°C to soften them, insert this seal rings in the
seat in the upper shutter (2), using a cylindrical
object to push this rings in the cross way. Also
insert the seal ring (240 present only into the
B925B)*.
3. Insert the seal ring (94)* into the lower shutter (51)
fitting as described in step 1.
5. Insert the seal ring (108)* in the upper body
(42).
The Company BARDIANI VALVOLE reserves the right to modify its products at any time without prior notice.
*Lubricate elastomers with a product suitable for food contact
240
2
14
62
94
51
42
108
2. Insert the seal ring (63)* into the middle shutter (93)
fitting as described in step 1. Also insert the seal
rings (96)* and (242 present into the B925B)* and
(78 not present into the B925B)* and the guide
bushing (193).
4. Insert the seal rings (69 and 126)* and the
guide bushing (64) in the lower plug (52).
6. Insert the seal ring (44)* in the middle body
(92).
63
193
78
242
93
96
69
64
126
52
92
44
(GB-IST-B925-0910) 28/35
Advertisement
Table of Contents
