Part Names And Functions; Body - Epson TM-m30III Technical Reference Manual

Part Names and Functions

Body

1 Roll paper cover
2 Panel LED
3 NFC Tag
4 Cover open lever
5 Feed button
6 Power button
7 Bottom cover
(With four rubber
feet attached)
8 Rear cover
(There is a logo on
the cover)
9 Status sheet button
Open this cover when loading or replacing roll paper.
These LEDs indicate the operating status of the printer.
For details on LED, see"Panel LED" on page
A mark is printed here to indicate the position of the NFC tag. Bring an NFC-compatible
device close to the mark to obtain information about the printer.
For the functions using the NFC tag, refer to
Operate this lever to open the roll paper cover.
Pressing this button once feeds roll paper for one line. Hold down this button to continue
feeding roll paper.
Turns the printer on or off.
The power button setting can be changed to disable the power on/off operation with the
power button. See "Power Button Settings" on page 100
Remove these covers when connecting the DC cable of the AC adapter, interface cables, or
USB cables of peripheral devices. Also, when you want to change the paper eject direction,
remove the two covers and reattach them switching the attachment position.
The printer is shipped with the covers attached so that paper is ejected upward.
Use this button to print a status sheet on interfaces or initialize the settings on interfaces.
Chapter 1 Product Overview
19.
"Useful Functions for Smart Devices" on page
for details.
30.
18