Panel Led - Epson TM-m30III Technical Reference Manual

Panel LED

• Wi-Fi + Bluetooth model
• Standard model
Power LED
• Lights when the power supply is on.
• Off when the power supply is off.
• Flashes during the network to start up, when waiting for power off, or updating firmware.
Do not perform the following operations while the printer is waiting for power off (while the power
LED is flashing). Otherwise, it may not startup correctly.
• Pressing the power button to turn on the printer
• Disconnecting the DC cable from the printer or disconnecting the plug from the wall outlet
• Turning off the circuit breaker
Error LED
• Lights or flashes when an error occurs. (For information about the flashing patterns, see
on page 23.)
• Lights after the power is turned on or after a reset (offline). Automatically goes out after a while to indicate
that the printer is ready.
• Off when the printer is in standard mode (online).
Paper LED
• Lights when there is not enough roll paper left, or when no roll paper is left.
• Flashes to urge user to operate the Feed button.
Ethernet LED
• Lights when a LAN cable is connected to the printer and the printer is ready for communication.
• Flashes when the printer is temporarily unable to communicate, such as when it is obtaining an IP address
after the LAN cable is connected.
• Off when a LAN cable is not connected to the printer and when the printer is connected to Wi-Fi.
Wi-Fi LED
• Lights when the printer is connected to Wi-Fi and ready for communication.
• Flashes when the printer is temporarily unable to communicate, such as when it is obtaining an IP address
after being connected to Wi-Fi.
Chapter 1 Product Overview
"Status and Errors"
19