Part Names And Functions; Panel Led - Epson tm-m30 Technical Reference Manual

Part Names and Functions

1
2
3
1 Roll paper cover
2

Panel LED

3 NFC Tag
4 Cover open lever
5 Feed button
6 Power switch
7 Status sheet button
Panel LED
Power LED
 Lights when the power supply is on.
 Off when the power supply is off.
 Flashes during the network to start up, when waiting for power off, or updating firmware.
Error LED
 Lights or flashes when an error occurs. (For information about the flashing patterns, see
on page 17.)
 Lights after the power is turned on or after a reset (offline). Automatically goes out after a while to indicate
that the printer is ready.
 Off when the printer is in standard mode (online).
Paper LED
 Lights when the roll paper is out.
 Flashes to urge user to operate the Feed button.
14
6
5
4
Open this cover when loading or replacing roll paper.
For details on LED, see "Panel LED" on page
A mark is printed here to indicate the position of the NFC tag. To establish communication
with an NFC device, bring the device close to this mark.
For the functions using the NFC tag, refer to
Operate this lever to open the roll paper cover.
Pressing this button once feeds roll paper for one line. Hold down this button to continue
feeding roll paper.
Turns the printer on or off.
Use this button to print a status sheet on interfaces or initialize the settings on interfaces.
14.
"Useful Functions for Smart Devices" on page
"Status and Errors"
7
20.