Atlas Filtri K-MATIC Installation, Use And Maintenance Manual page 4

Garanzia
Conservare l'etichetta della scatola per identificare il prodotto.I termini di garanzia applicati sono
quelli contenuti nella Direttiva CEE 85/374 per i paesi UE. Per i paesi extra UE il prodotto è coperto
da garanzia limitata per 12 mesi dalla data dell'acquisto provato da regolare scontrino. Richieste di
risarcimento devono essere fatte per scritto al punto vendita - o ad Atlas Filtri S.r.l., Via Pierobon,
32 - 35010 Limena, Italia. Il danneggiato deve: indicare il prodotto, il luogo, la data di acquisto;
offrire il prodotto in visione; provare il nesso causale tra difetto e danno. Per qualsiasi controversia
il produttore elegge come Foro competente il Tribunale di Padova, Italia, con applicazione della
normativa italiana.
figura 2 figura 3
Dear Customer, congratulations on choosing this product from ATLAS FILTRI¨, manufactured
in Italy. Please read this document carefully and store it in a safe place. It will help you to better
understand and use the product.
K-MATIC is a solenoid valve with programmable opening that enables automatic flushing of filters
equipped with a ½" BSPP M threaded connection.
Technical features:
- ½" BSPP F IN/OUT connections
- Maximum operating pressure: 8.3 bar
- Minimum operating pressure: 1.8 bar
- Maximum operating temperature: 45 °C
- Minimum operating temperature: 4 °C
Materials:
- Timer body: ABS
- Valve: PA66
K-MATIC is compatible with the self-cleaning filters of the HYDRA series and the drain filters of
the PLUS S 3P BX and CX, DP S and DP S DS, K PLUS S 3P, K DP S and DP BIG S series.
K-MATIC features a programmable timer that cyclically operates the solenoid valve in two modes:
• Manual
• Automatic, at each set time interval and for the set opening duration. In automatic mode, the
interval between two valve openings and their duration are programmable according to the
following options.
figura 4
Interval: 12h-24h-7-15-30 days Duration: 10"or 20"
Each valve opening is followed by a second opening with a fixed duration of 3" .
CONNECTING K-MATIC TO THE BOWL DRAIN (figure 2)
- Connect K-MATIC to the bowl drain using the brass swivel fitting supplied in the package.
- Insert the two green gaskets, included in the supply, between the socket and the swivel fitting
and between the latter and K-MATIC.
- Screw the fitting onto K-MATIC first and then K-MATIC to the bowl drain. The brass swivel nut can
be used to position the K-Matic according to the user's needs.
- Using the PTFE tape, screw the drain funnel or hose connector into the K-MATIC lower threaded seat.
HYDRAULIC CHECKS AND COMMISSIONING
Complete the installation and connection of the filter drain and perform the following steps:
a. Check for any water leaks by gradually opening the water going into the filter;
b. Check that K-MATIC is correctly installed so as not to obstruct regular filter maintenance operations;
Max 2 mt c. Check that the drainage line is firmly attached to K-MATIC and that no water leaks during filter
cleaning operations. Then, connect to the drain funnel or hose connector at the bottom of the