Zte MC8010CA Getting Started page 16

Hide thumbs Also See for MC8010CA:
Table of Contents

Advertisement

Available languages

Available languages

Voice Related Problems
Symptoms
There is no dial tone.
There is a prompt / phone
alert / announcement as
soon as I lift the phone off
the hook.
The line is noisy/distorted
when I lift the phone off
the hook.
I hear a rapid engaged
tone as soon as I lift the
phone off the hook.
After dialing the last digit
I hear nothing/silence.
Possible Problems/ Solutions
Please wait for 1~2 minutes after the router is turned
on.
If the SIG indicator is weak, you have no good RF
reception. Change the location of the router.
Make sure your nano-SIM card is inserted correctly
and the PIN number has been entered. If the PIN
number has been entered incorrectly, you need to
enter the PUK code when prompted.
R emove any electrical appliance which is too
close to the phone or your device.
The cable or phone set might be faulty.
Put the phone on the hook and try again.
Please contact your service provider.
When you have finished dialing you can press the #
key or wait 4~8 seconds to connect the call.
15

Advertisement

Table of Contents
loading

Table of Contents