Philips sonicare 6800 Series Manual page 20

20
English
2 Remove the film at the bottom of handle, then
release the screw.
3 Remove the end cap from the toothbrush handle.
4 Holding the handle upside down, press the shaft
down on a hard surface.
5 Wedge the screwdriver between the battery and the
white frame at the bottom of the internal
components. Then pry the screwdriver away from the
battery to break the bottom of the white frame.
6 Insert the screwdriver between the bottom of the
battery and the white frame to break the metal tab
connecting the battery to the green printed circuit
board. This will release the bottom end of the battery
from the frame.
7 Grab the battery and pull it away from the internal
components to break the second metal battery tab.
Caution: Be aware of the sharp edges of the
battery tabs so as to avoid injury to your fingers.