Table of Contents
Advertisement
Chapter 2: Installation and Setup
Chapter 2
Installation and Setup
This chapter provides instructions on installing and replacing main system components.
To prevent compatibility issues, only use components that match the specifications or part
numbers.
Up to ten blade modules may be installed into a blade enclosure, depending upon your
enclosure and blade. Blade modules with Windows and Linux operating systems may be
mixed together in the same blade enclosure.
2.1 Unpacking the System
Inspect the box the system was shipped in and note if it was damaged in any way. If any
equipment appears damaged, please file a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the enclosure. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic fields are generated. It will also require a grounded AC power outlet nearby.
Be sure to read the precautions and considerations noted in Appendix B.
17
Advertisement
Table of Contents
Troubleshooting
