Carrying Out Continuous Mean Calculation - TESTO 417 Instruction Manual

sales@GlobalTestSupply.com
The number of measured values and the calculated multi-point mean
value are displayed.
4 To switch back to the measuring view:
Press MODE/END.
7.2.5

Carrying out continuous mean calculation

1 Press MODE/END

flashes.

The elapsed measuring time (mm:ss) is displayed in the upper line,
while the current reading is displayed in the lower line.
2 Start measurement:
Press MENU/ENTER.
3
To interrupt/continue measurement:
Press MENU/ENTER
4 To end measurement and calculate the mean value:
Press MODE/END.

and flash.
The measurement period and the calculated continuous mean value
are displayed.
5 To switch back to the measuring view:
Press MODE/END.
www.
twice.
each time.
Testo-Direct
7 Using the product
17
1.888.610.7664
.com