Carrying out continuous mean calculation
7.2.5
1
Press
MODE/END
flashes.
The elapsed measuring time (mm:ss) is displayed in the upper line,
while the current reading is displayed in the lower line.
2
Start measurement:
Press MENU/ENTER.
3
To interrupt/continue measurement:
MENU/ENTER
Press
4
To end measurement and calculate the mean value:
Press MODE/END.
and
The measurement period and the calculated continuous mean value
are displayed.
5
To switch back to the measuring view:
Press MODE/END.
twice.
each time.
flash.
7 Using the product
17