Daikin VRV FXHA32AVEB8 Manual page 55

To mount the indoor unit
FXHA-A
VRV system air conditioner
4P673749-1A – 2022.11
1 Open the knockout hole at the wiring inlet at the rear or the top of the unit,
and install the resin bushing (accessory).
a Resin bushing (accessory)
b Knockout hole (for leading in from the top)
c Knockout hole (for leading in from the rear)
2 Remove the hanger bracket. Loosen the 2 hanger bracket installation bolts
(M8) on both sides (total 4 places) within 10 mm. Remove the fixing screw
(M5) from the rear hanger bracket and pull the hanger bracket backward in
the direction of the arrow in order to remove it.
a
b
b
c
a Hanger bracket fixing screw (M5)
b Hanger bracket installation bolt (M8)
c Hanger bracket
d Indoor unit
CAUTION
Do NOT remove the (milky white) tape from the exterior of the indoor unit.
Removing the tape may cause an electric shock or a fire.
3 Fix the hanger bracket to the suspension bolts.
installing the indoor
4 Lift up the indoor unit and slide it to the back. Fix the hanger bracket
installation bolt (M8) for temporary hanging. Do NOT hold the unit by the
reinforcing plate.
a
b
c
a
b
d
10 mm
c
4
unit" [ 52].
a
b
b
c
d
16 Unit installation
|
"16.2.1 Guidelines when
Installer and user reference guide
55