Greenheck DOAS v8.1 Reference Manual page 17

Unit Status Overview
hgrh r
amp
This screen will display the status of the hot gas reheat ramp. The screen includes
the active setpoint, supply air discharge temperature, the ramp status, and hot
gas reheat valve request being sent from the controller.
s s s
upply pace TaTic
This screen displays status points if the unit is configured for space static
pressure control. Status points include controller output ramp, static pressure in
the space, and the space static pressure setpoint. Similar status screens appear
for exhaust fan and outside air damper control if the unit is configured.
s /r d s
upply eTurn ucT TaTic
This screen displays status points if the unit is configured for duct static pressure
control. Status points include controller output ramp, static pressure in the duct,
and the duct static pressure setpoint. Similar status screen will appear for the
exhaust fan if the unit is configured for exhaust fan duct static control.
c
ondiTions
The condition screens are active when both temperature and humidity sensors
for the location are installed in the unit. The enthalpy and dew point are calculated
based on the temperature and humidity readings. The unit altitude is used for the
enthalpy calculation.
Microprocessor Controller for DOAS 17