For five full years Salamander Designs Ltd will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or
destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and packing
material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the owner. Warranty repairs will be returned prepaid, via UPS within the continental U.S.A. only.
Summary of Contents for Salamander Designs SYNERGY 245
Page 1
Limited Warranty For five full years Salamander Designs Ltd will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and packing material.
Page 2
Connect Posts to Bottom Shelf Add Shelf Pegs & Door Hinges WARNING: Tighten by screwing the leveler foot NOT the post. Washer The heavy duty brackets will be used Slide the bottom hinge plate through the to supoort the double-width shelf. front post channels.
Page 3
Attach Doors Insert the hinges into the corresponding holes on the doors. Turn the screws 1/4 turn to the right to lock hinges in place. Doors should be 1/8” above the bottom shelf before Screw the Door Pull into place. Attach the rubber stops to the inside of the door fully tightening hinges to post.
Page 4
Attach Rear Panels Final Assembly Fine Tuning SOFT CLOSE INSTALLATION Use the hex key to secure the top and bottom studs to the posts. SLOW CLOSE FAST CLOSE Doc No. 501-090/v10.12 245 -4 of 4...
Need help?
Do you have a question about the SYNERGY 245 and is the answer not in the manual?
Questions and answers