Pairing The Hand-Held Transmitter - Webasto Telestart T100 HTM Operating Instructions Manual

Pairing the hand-held transmitter

13
The hand-held transmitter Telestart T100 HTM must be paired with the Tele-
start receiver in the vehicle.
Determining the installation position of the fuse
13.1
Depending on the heater and its installation or application, the Telestart fuse is
installed in the engine compartment or the vehicle interior.
Teaching the unit
13.2
HTM Heating-Time-Management
14
Information regarding the heating time:
We recommend matching the heating time to the driving time (heating
time = driving time)
Example
commend not exceeding a switch-on time of 20 min.
Heating time management
tion) of the vehicle for a selected start-out time.
The system determines the preheating time of the parking heater depending
on the passenger compartment temperature of the vehicle.
The passenger compartment temperature reached at the start-out time can be
influenced by 5 comfort levels (C1 to C5). C1 is the lower comfort temperature
(short operating time) and C5 is the higher comfort temperature (long operat-
ing time). The start-out time can be activated up to 24 hours in advance.
Displaying the comfort level
14.1
Insert battery in the battery compartment of the
u
hand-held transmitter.
Press the OFF push button (hold it for at least 1
u
s). The hand-held transmitter has now been
> 1 s
taught.
: for a driving time of approx. 20 min. (in one direction), we re-
/ enables automatic preheating (not ventila-
9