Table of Contents
Advertisement
Instructions for Use RAUMEDIC
One
temperature
connected to input T1.
After the temperature sensor has been connected, the display field, which has been allocated to the
temperature input, will display the numerical value of the temperature measured. For the settings of the
limiting alarm values the settings mode is active first which you have selected in the window Selection alarm
limiting values when the unit was started. For data on the basic settings of the alarm limits, the alarm
activation and the settings of the alarm limits, please refer to chapter 4.9.2 Factory settings.
Manufacturer:
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany
MPR2 logO
sensor
Second
temperature
connected to input T2.
Page 55 of 99
sensor
In
the
graphics
temperatures are displayed as
numerical values only.
Optical alarm T2
Other settings T1
Alarm limits
Other settings T2
Alarm limits
Information
(on alarms, for example).
Rev. 9 2020-09-22
screen,
the
zwo-400EN
Advertisement
Table of Contents
