Table of Contents
Advertisement
Instructions for Use RAUMEDIC
7
6
5
4
3
2
1
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9] to
[16]
[17]
Table 1: Keys and functions
Manufacturer:
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany
MPR2 logO
Figure 1: Operating elements, connections, displays
The Shift key switches this operation control key to the second level. The Shift
key is a toggle key (thus it switches on and off alternately); however, the Shift
status is automatically left without depression of the key after 15 seconds.
The right arrow key sets the display to the next image. When the last image
is made, the first image is displayed again.
The light bulb symbol switches the background lighting on/off in battery-
operated mode (toggle function). After 60 seconds the lighting is switched off
automatically. During mains operation this key has no function.
The bell symbol switches the AUDIO OFF function of the active alarm
conditions (in keeping with standard IEC 60601-1-8), long depression sets
global AUDIO PAUSING or global AUDIO OFF).
The Symbol on/off key is used to switch the unit on and off. To switch the unit
off, keep the key pressed for 2 seconds.
Power On LED (green) combined with the optical display for alarms with
higher priority (red LED).
Display for alarms with high priority (flashing red LED) or average priority
(flashing yellow LED).
Display
Soft keys, also referred to as F keys.
Connection field
Page 10 of 99
8
9
10
11
12
13
14
15
16
17
zwo-400EN
Rev. 9 2020-09-22
Advertisement
Table of Contents
