Table Of Contents - KANSAI SPECIAL DFB MR-S Series Parts List, Instructions

Industrial sewing machines
Table of Contents

Advertisement

INTRODUCTION
Thank you for your purchasing Kansai Special's DFB/MR-S Series.
Read and study this instruction manual carefully before beginning any of the
procedures and save it for later use.
1.
This instruction manual describes adjustments and maintenance procedures on the
MR-S series. Refer to the DFB-G Series instruction manual for basic adjustment.
2.
Before starting the machine, check to make sure the pulley cover, safety cover, etc.
are secured.
3.
Before adjusting, cleaning, threading the machine or replacing the needle, be sure to
turn off the power.
4.
Never start the machine with no oil in the reservoir.
5.
Refer to the parts list as well as this instruction manual before performing preventive
maintenance.
6.
The contents described in this instruction manual are subject to change without notice.
I n d i c a t i o n o f s e r i a l n u m b e r
Zip code
Model
2 0 0 0 0 0 1
Serial number
The date of manufacture
(Manufactured in 2020)
MR-S
CONTENTS
1-1 Stitch type ························································································· 2
2-1 Needles ····························································································· 2
2-2 Replacing the needle ··········································································· 2
2-3 To thread the machine ········································································· 3
pulley runs ························································································· 5
3-2 Motor & belt ······················································································· 5
3-3 Attaching direct motor ········································································· 5
4-1 Cutting the machine table ···································································· 6
5-1 Adjustment of bottom stripper blade ······················································ 8
5-2 Adjustment of ruffling arm ··································································· 8
5-3 Timing of ruffling arm ········································································· 9
5-4 Change ruffling ratio ··········································································· 9
·························································· 10
1
MR-S

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfb1402mr-s

Table of Contents