Table of Contents
Advertisement
Figure 6. Remove the power board with cable
Screw specifications
M2 x L3
Go to
https://support.lenovo.com/partslookup
replacement parts:
Power board with cable
Remove the fan
Make sure the dock has been pulled out from the dock shell.
Step 1.
Disconnect the fan cable from the system board. Then pull out the four fan rivet rubbers and
remove the fan.
Number of screws
2
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing an FRU or CRU
19
Advertisement
Chapters
Table of Contents
