Go to
https://support.lenovo.com/partslookup
part:
Graphics card bracket
Remove the graphics card
Make sure the dock has been pulled out from the dock shell and the following FRU (CRU) has been removed.
"Remove the graphics card bracket" on page 22
Step 1.
Disconnect the graphics card power cable from the graphics card and remove the one screw. Then
open the card slot latch and pull up the graphics card.
Figure 13. Remove the graphics card
Screw specifications
M3 x L5
Go to
https://support.lenovo.com/partslookup
replacement parts:
Graphics card
Remove the MID support bracket
Make sure the dock has been pulled out from the dock shell.
Step 1.
Remove the three screws and then remove the MID support bracket.
to look up the Lenovo part number of the following replacement
Number of screws
1
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing an FRU or CRU
23